DISTRIBUTED PROCESSING TECHNOLOGY PM2012B/90 Data bus: 32-bit, EISA Size: Full-length, full-height card Hard drives supported: Up to seven SCSI devices Floppy drives supported: None Sector interleave: 1:1 [Image] CONNECTIONS Function Location Memory module connector CN1 Memory module connector CN2 Cache module connector CN3 Cache module connector CN4 Disk mirroring module connector CN5 4-pin connector-drive active LED CN6 Disk mirroring module connector CN7 50-pin SCSI connector-internal CN10 50-pin SCSI connector-external CN11 USER CONFIGURABLE SETTINGS Function Location Setting » BIOS disabled JP7 open BIOS enabled JP7 closed » BIOS address C800h JP19 open BIOS address D800h JP19 closed LED INFORMATION Function Location Busy LED1 Computer bus transfer to controller LED2 Computer bus transfer from controller LED3 Cache hit LED4 Disk read-ahead active LED5 Disk read LED6 Disk write LED7 Controller reset LED8 Controller interrupt pending to computer LED9 DRQ asserted to computer LED10 MISCELLANEOUS TECHNICAL NOTES There are only two user configurable jumpers on the PM2012B/90 (BIOS address and enable), all other configurations are done through the software supplied with the controller.